United Resin Corp.

Thomas Verified

Optik-Bond Adhesives are ideal for potting and sealing optical connectors, fibers, lenses, and all other optical components.

This system has superior adhesive properties on all metals, rubber and hard plastics (non-polyethylene) and is sandable in 10 to 15 minutes. Used in automotive repairs and all plastic parts repairs.

E-CAST Flame Bloc is an unfilled epoxy system approved UL 94 V-O. This system offers excellent air release and gloss. It has a rigid cure with excellent adhesion and chemical resistance.

This system is a non-sag compound, with superior compressive and adhesive strength. It adheres to most metals and various substrates. Meets Mil Spec. MIL-PRF-24176 Type I and Type II.

Silflex is a silicone based, low modulus epoxy that is 100% solids. This system is a thermally stable epoxy that retains its flexible nature.

EL-CAST 1-F-5 TAB & TAB-SR are filled, medium viscosity resins that can be used as a one or two component system with excellent thermal conductivity and high temperature resistance. Exhibits good chemical resistance and excellent adhesion at high temperature with a More... room temperature or a heat cure. Ideal for transformers, filters, coils and all applications where heat cure is possible. Less

Exhibits excellent adhesive properties on metals and is resistant to most chemicals and moisture with good thermal shock resistance. Meets Mil Spec. MMM-A-187B.

Vibraflex is a vibration dampening, flexible epoxy system featuring low exotherm, good thermal shock, low shrinkage, and can be easily cut for repair of components. Specially formulated for adhering board devices and for reducing the impact of shock and vibration on More... all parts. Less

This is a quick set adhesive with superior adhesive properties on all metals, rubber and hard plastics (non-polyethylene) and can be handled in 10 to 15 minutes.

Circuit Bond Adhesives are a series of lead-free, low temperature cure, high speed dispensed surface mount adhesives.

A non-sag adhesive with superior bonding to all substrates including SMC and stainless steel.

A high impact, vibration resistant, flexible adhesive for metals, plastics, wood and ceramics.

A general purpose, 5 minute quick setting epoxy for adhesive and patching applications.

Good adhesion to metals, plastics and ceramics. Meets requirements of FDA under 21 CFR 175.300 and Mil Spec. MIL-A-81236.

A high impact, vibration resistant, flexible adhesive for metals, plastics, wood and ceramics.

This is an unfilled epoxy system with a room temperature cure with excellent adhesion to metals, plastics and ceramics.

An adhesive and sealing compound for all metals. Meets Mil Spec. MMM-A-1754.

Used for adhesive and electronic applications such as wire staking, bonding components, strain gauges, fiber optics and ferrite cores.

Used for electronic applications such as wire staking, bonding components, strain gauges, fiber optics and ferrite cores.

Widely used in the automotive and aerospace industries as impreg glue.

A toughened medium viscosity adhesive that forms a tough bond line with high peel resistance and high shear strength.

Uni-Gel S.C. 90 Resin with TP-41F Hardener is a white, room temperature cure, epoxy surface coat. It has good bonding properties, holds well on vertical surfaces and its viscosity allows it to be easily measured through a dispenser. It is highly recommended for plastic More... faced plasters and renders a hard surface. This system is also available in a thin version suitable for spray applications. Less

A general purpose, 45 seconds quick setting epoxy for adhesive and patching applications.

Uni-Bond W.G. with 601 Hardener is a clear, unfilled, multi-purpose lamination material which exhibits excellent moisture and chemical resistance. It has numerous adhesive applications, including extensive use in the automotive and aerospace industries as "impreg glue". More... Less

EL-CAST is a filled, medium viscosity, general purpose potting and encapsulating resin. Excellent bonding properties, good air release and high gloss finish. Underwriter Laboratory (UL) approved 94 HB. Ideal for transformers, circuit boards, magnetic components, noise More... filters, and other applications. EL-CAST FR/440 is 94 V-O approved. Less

EL-CAST 760 is a filled, medium viscosity, high temperature potting and encapsulating resin. Excellent impact resistance, thermal shock resistance, thermal conductivity and high deflection temperature. Ideal for control units, transformers, noise filters, and other More... applications. Less

EL-CAST VFR is a filled, low viscosity, high temperature potting and encapsulating resin. Underwriter Laboratory (UL) approved at 94 V-O. Resin has excellent bonding properties, high gloss finish with minimal shrinkage and with 117 hardener is a soft 94 V-O material. More... Ideal for transformers, alarm systems, filters, magnetic components and surge protectors. Less

EL-CAST SS is a highly filled, general purpose potting resin, with high thermal conductivity and high strength. Ideal for all applications requiring a tough protective system with high mechanical and physical properties.

EL-CAST 1-F-5 TAB VO is a filled, high viscosity, high temperature one component system. Underwriter Laboratory (UL) approved at 94 V-O. Exhibits low odor, good air release, high gloss finish, and good thermal conductivity. Also used as an encapsulant for "chip-on-board" More... applications. Less

Uni-Lam 1069 is a filled, medium viscosity, general purpose potting compound. Excellent bonding to metals, plastic and ceramics with high gloss finish. Ideal for all potting applications.

E-CAST F-28 is an unfilled, medium viscosity, high strength resin with good release, excellent adhesion, clarity and room temperature rigid cure. Ideal for applications where internal viewing is required.

E-CAST F-82 is an unfilled, low viscosity resin with high strength adhesion, good air release. Ideal for the most intricate applications, circuit boards, and other applications.

E-CAST W.G. is an unfilled, low viscosity, clear potting compound. Excellent adhesion and low viscosity allows for the most intricate applications. Ideal for circuit boards, power supplies, and other applications.

Conductive Epoxy is a high strength, heat resistant, silver filled system, which can be cured at ambient or elevated temperatures.

E-CAST CCA is an unfilled, low viscosity resin with superior penetrating properties and high gloss finish.

Exhibits good impact resistance and improved wear resistance. Meets Mil Spec. MIL-R-22628.

This is a rubber based epoxy system that exhibits good thermal shock and excellent impact resistance.

A durable compound for repair to aluminum castings and tooling applications. When cured this system can be drilled or tapped using conventional metalworking tools.

An aluminum-filled pourable epoxy system used for making molds, patterns and holding fixtures. This system permits reproduction of delicate or intricate parts for accurate reproduction of details.

A durable compound that can be drilled, tapped, machined or painted when cured. Bonds to steel, aluminum, brass, wood, glass, ceramic and iron. Ideal for patching, repairing and rebuilding steel equipment. Meets MIL Spec. AA-56015A.